Nonin Avant 4000 Tabletop Wireless Digital Pulse Oximeter with Bluetooth

A Solid Performing Pulse Oximeter Without Wires
The Avant 4000 is an industry-leading tabletop pulse oximeter using the renowned PureSat® technology from Nonin Medical. Building on the already successful Avant 9600 platform, the Avant 4000 adds freedom from sensor wires with the addition of a Bluetooth® wireless module. This capability makes the Avant 4000 an ideal choice for hospitals, clinics and at-home users who need continuous monitoring of pulse oximetery data while retaining freedom of movement. This, coupled with a programmable alarm and 33 hours of data storage, makes the Avant 4000 a powerful patient monitoring tool.

Great for Hospitals, Clincs, and At Home!
The powerful features of the Avant 4000 make it great for patient monitoring across many different types of environments. Big enough to give you professional features yet small enough to be portable, the Avant 4000 can be mounted on rolling stands, carried in an available carry case, or simply placed beside the bed. With it's flexible power options, the Avant 4000 can be easily transported without losing monitoring capability. The wireless connectivity means bedside clutter is greatly reduced while allowing the patient greater freedom from movement. This also makes the 4000 an ideal pulse oximeter for use in exercise sessions. With an indoor broadcast range of 30 feet, the Avant 4000's base station can even be placed in a nearby room while the patient remains in another!

Read about how the Nonin Avant 4000 has been tested and evaluated in a clinical environment.

Multiple Power Options
The Avant 4000 pulse oximeter not only comes with wireless sensor capability, but also allows you to untether the unit from the wall with the included battery pack. This 6-cell battery gives the 4000 a minimum of 18 hours of continuous operation when fully charged. The included battery charger will recharge the battery pack in a mere 4 hours. Plug the Avant 4000 into the wall and continuously monitor pulse oximetery statistics whenever you want. This functionality means moving patients does not require you to lose pulse oximetry data during the transport.

The Wireless Bluetooth® Patient Module - Easy to Wear and Use
The Avant 4000's patient module is what powers the Bluetooth® connectivity to the base station. This lightweight, wearable device securely transmits blood oxygen saturation (SpO2), pulse rate and plethysmorgraphic data to the tabletop base station and weighs a mere 4.4 ounces. The cut-to-size wristbands are made to fit a wide range of patient sizes and a color-coded LED gives an easy to read visual indication of the wireless connection status. While normally worn on the wrist, the patient module is also capable of being worn on the ankle when using the sensor on a toe. There is no programming involved to get the patient module to work - it couldn't be easier. The patient module automatically turns on whenever the sensor is connected. Each sensor is designed with a short, 12 inch cable to further avoid clutter and entanglements. Each patient module includes a specific identification number to confirm the correct patient module is connected to the base unit. The patient module will perform for 120 hours of continuous operation on two standard AA batteries

All You Need to Get Started is Included
Each Nonin Avant 4000 pulse oximeter comes with everything you need to get going - there's no need to buy anything additional. Each unit includes:

• (1) 4000 tabletop base unit
• (1) 8000AA-WO Adult Finger Clip Sensor
• (1) Battery charger
• (1) Power Cord
• (1) Avant "B" Battery pack
• (1) 4100 Bluetooth® patient module
• (2) AA batteries
• (2) Cut-to-size reusable wristbands
• (1) Owner's manual on CD-ROM

• A wide range of Nonin PureLight® sensors - including Soft Sensors and Flex Sensors
• Replacement cut-to-length wristbands
• A carrying case
• Avant series rolling stand in either standard or 5 point
• A pole clamp for horizontal or vertical mounting
• Nonin's powerful nVision software for pulse oximetry data storage, analysis and screening

Technical Specifications

4100 Wearable Patient Module w/ Bluetooth®

• Oxygen Saturation Range: 0% to 100%
• Pulse Rate Range: 18 to 300 pulses per minute
• Accuracy:
  • Blood Oxygen Saturation (%SpO2 +/- 1 SD): 70 - 100% +/- 2 digits for adults using Finger Clip sensor
  • Pulse Rate: +/- 3%
• Connection Status LED: Amber or Green
• Measurement Wavelengths:
  • Red: 660 nanometers @ 3 mw nominal
  • Infared: 910 nanometers @ 3 mw nominal
• Internal Power:
  • Battery: Two 1.5 volt AA batteries
  • Operating: Minimum 120 hours of continuous operation with new batteries
  • Storage: 10 months
• Weight: 4.4 oz with batteries

Avant 4000 Display Unit

• Displays:
  • Numeric Displays: 3-digit LED's, Tricolor (Red, Green, Amber)
  • Pulse Strength Indicator: Tricolor LED segments
  • Pulse Quality Indicator: Amber LED
  • Connection Status LED: Amber or Green
• Power Requirements:
  • Mains: 100-240 VAC 50-60 Hz
  • DC Input: 12 VDC AC adapter
• Internal Power:
  • Battery: 7.2 volt battery pack - 6 cell
  • Operating: Miniumum 18 hours of continuous operation with a fully charged battery pack
  • Storage: 17 days
  • Recharge: 4 hours
• Dimensions:
  • Width: 7.25" (18.4cm)
  • Height: 5.5" (14cm)
  • Depth: 4.5" (11.4cm)
• Weight: 2.2 lbs with battery
• Memory: 33.5 hours minimum

Avant 4000 Digital Pulse Oximetry System

• Temperature:
  • Operating: +32°F to +122°F (+0°C to +50°C)
  • Storage/Transport: -22°F to +122°F (-30°C to +50°C)
• Operating Altitude: Up to 40,000 Feet
• Hyperbaric Pressure: Up to 4 Atmospheres
• Humidity:
  • Operating: 10% to 90% noncondensing
  • Storage/Transport: 10% to 95% noncondensing
• Antenna Type: Inverted F type antenna
• Antenna Gain: +2 dB (typical), +3 dB (max)
• Warranty: 3 years

Transmitter

• Bluetooth® Compliance: Version 1.1
• Operating Frequency: 2.4 to 2.4835 GHz
• Output Power: < 1.1mW
• Operation Range: 10 m radius indoors (30ft)
• Network Topology: point to point
• Operation: Slave: 4100 patient module; Master: 4000 base unit
• Antenna Type: Internal

Classifications per IEC 60601-1 / UL2601-1

• Type of protection: Class I (when on AC power with 300PS-UNIV battery charger) - Internally powered
• Degree of protection: Type BF-Applied Part
• Mode of Operation: Continuous